Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Product Description
Specification
Watt: 20 Watt LED Chip
Solar Panel : 6W
Battery Capacity : 5 Ah
Product details
Recommend installation Height
Height : 12~16 ft
Very easy to install, 4 bolt nuts given along with White Bracket to fix ARM to the Pole.
Use the Black bracket with 2 small bolt and nuts to secure the light to the ARM
Packing included
Solar Street Light x 1
Bracket x 1
Screws x 6
ARM x 1
Remote x 1
Remote Functionality
3H Button : Lights up to 3 Hours
5H Button : Lights up to 5 Hours
8H Button : Lights up to 8 Hours
PIR Button : Motion Sensor Mode
PMW+PIR : Always On Mode
To switch On the light Press PIR or PMW+PIR Button
Troubleshooting Steps :
Short working time
1. The battery is not fully charged. Install the solar light in an area where it can receive the maximum amount of full, direct sunlight.
2. Please press PIR button in Remote, as a timer mode might have been enabled. press the PIR button and let the light charge for 1 full day.
3. If 3H,5H & 8H buttons are pressed, the light will light up only for 3 Hours, 5 Hours & 8 Hours respectively and switch off completely and will only turn on the very next day evening once its charged.
Not working at night
1. The installation location is too close to other light source. Relocate the solar light or keep it away from the other light sources.
2. The light is still not lighting up, please let it charge for at least 2 full days, make sure a RED light is coming from inside the Motion sensor indicating that the light is charging.
Automatic On and Off with two modes: button pressed first time (Motion sensor mode) the light with switch On with 100% brightness at the beginning for 30 seconds, then brightness reduces to 30% and stays at 30% until motion is detected. If a motion is detected, the brightness goes to 100% for 30 seconds. Button pressed second time (Non-motion sensor mode) light will switch On at 75% constant brightness irrespective of movement for first 3 hours later switches back to motion sensor mode.
Button Function: ‘Button pressed once’:Auto-mode is ON with motion sensor ON and Dawn to Dusk also ON,’ Button pressed the second time’: Auto-mode is ON with motion sensor Off for the first 3 hours(A Blue Light will be On near PIR Sensor) then switch back to motion sensor On mode, ‘Button pressed the second time’: light switch off
[ad_2]
