Price: [price_with_discount]
(as of [price_update_date] – Details)
Product Description
SOLAR LIGHT ASSEMBLY AND POERATING INSTRUCTIONS READ AND FOLLOW CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT SAVE THIS MANUAL FOR FUTURE REFERENCE
INSTRUCTIONS:
How Your Solar Motion Sensor Light works During the day, the solar charge panel included with this Solar Security Light converts sunlight into electricity recharging the batter. Using this stored energy, the LED lights (included in this Solar Security Light) turn on automatically at night when motion is detected. When the battery is fully charged, this Solar Security Light can light up to 180 times when on for 34 seconds at a time for a total of 1.7 hours. T
he light works with a build-in PIR (Passive Infra Red) sensing device which is continuously scanning for heat-source moving in its deteetion scope. Once a heat sQurce (such as a human or a car) is detected in that area, the light switches on immediately and automatically to illuminate your pathways, steps, patios, porches or anywhere you select for safety, convenience and security. The light remains on while the moving heat-source stays in the detecting scope. Choosing a Location for Your Solar MotionF
or optimum sun exposure and longer light output, place the solar panel in a position that receives at least 8 hours of direct sunlight per day. Ideally, the solar panel should face south. Placing the solar panel in a shaded location will not allow the battery to fully charge and will reduce the number of the light’s operating hours. In choosing a location for your solar motion sensor light, ensure that the solar panel is not placed near night time light sources such as porch light or street light. I
deally, for maximum detection range, the light should be mounted 1.8 to 2.5 meters (6 to 8 ft) above the area to be scanned. This solar motion sensor light is ideal for areas where electricity is not available, including driveways, carports, garages and entrance doors, for added safety and security around your home. When deciding where to mount the light, keep in mind that the motion sensor that activates this light has a field of vision of 1200 (horizontal) at a maximum distance of s meters (16 feet) when the surrounding temperature is 25°C (77°F).
Troubleshooting
PROBLEM:- Light will not switch on when there is movement in the detection area
SOLUTIONS:- Ensure that the power switch on the main body has been turned to the ON position. Ensure that the motion sensor has been positioned to face oncoming movement. Ensure that the battery have been fully charged in direct sunlight for 8 hours. Refer to the “First time use of your Solar Powered Motion Sensor light”.Check to see that the solar panel is facing south so that it receives direct sunlight for most of the day, enabling the battery to fully charge. Check to see that the solar panel is not near a light source, such as street light.The rechargeable battery may need to be replaced
PROBLEM:- Light switches on during the day.
SOLUTIONS:-The light is placed in a dark shaded area. Reposition the motion sensor
PROBLEM:-Light quickly flashes on and off and/or light is not as bright as normal
SOLUTIONS:- Battery charge may below. Turn the power switch to the “OFF” position and charge the battery for 8 hours, ensuring the solar pane! has been placed in direct sunlight. The rechargeable battery may need to be replaced.
PROBLEM:-light switches on for no apparent reason
SOLUTIONS:-Moving trees, traffic, pets, or birds may be getting in the area of detection. This may be unavoidable; however the sensor could be redirected to a height where this is less likely to occur. If there are reflective objects in the detection area such as windows, water or white walls, you may need to redirect or possibly reposition the motion sensor.
1.Insert the DC line of solar panel to the hole at the back of led light, Then the led light automatic on, when the ray of light is more than 100lux, solar panels will charge the solar product by placing it under direct sunshine for at least 4 hours 2.lt infraed sensors detect subtle temperature changes caused by movement of people within the selected area of protection
The instant motion is detected, the lights turn on automatically. When the motion stops, the lights stay on for approx 30 4seconds
Maintenance :-To keep your solar motion sensor light looking new, keep the lens free of dust and deposits by wiping occasic a dry cloth or withwarm soapy water if necessary. Most important, ensure that the solar panel is kept free of dirt and debris at all times. A dirty solar panel will the batteries to fully charge and this will shorten the life of the batteries and may cause the light to malfuncti
CAUTION:- Safe for outdoor operation. Failure to insert battery/batteries in the correct polarity, as indicated in the battery . In temperatures below -6%C (21F), the solar motion sensor light may not work as well. Normal performance will return when the temperature rises. If you wish to store your light indoors for more than two (2) or three (3) days, tumn the power switch to the “OFF position to prevent damaging the battery.
[ad_2]